FEATURES
IMPROVES QUALITY OF HOME DRINKING WATER
55w UV water sterilizer is an effective way to eliminate 98% of bacteria (when treated properly) in your water. An Ultra Violet Light provides you with 9000 hours (approximately 1 year) of consistent output to ensure continuous disinfection of bacteria, viruses, and protozoan cysts.
CHEMICAL-FREE WATER TREATMENT
UV does not contribute to poor-tasting water like chlorine, nor is it chemically active. Chlorine may actually react with other ingredients present and form compounds of a toxic nature. Ultraviolet radiation does not use heat or chemical additives of any kind during the UV sterilizer home water. The simple fact that it comes into contact with the microorganism is enough to inactivate it and render it harmless.
ECONOMICAL & EFFECTIVE
By inactivating bacteria and other harmful particles found in 12 gpm UV water sterilizer filter, UV radiation leaves no chemical side effects. To be effective, however, it must enter clear water so as not to be absorbed.
EASY INSTALLATION & OPERATION
It would take you less time on installation as the compact design and simple components. Water flows through the 1 gpm UV water sterilizer without need for holding tank or reaction times.
SPECIFICATION
Model |
Flow rate (LPM) |
Reactor dimension |
In/outlet port |
Package size (cm) |
Lamp power |
SSE-055 |
48 |
955*63.5mm |
3/4” male |
119×28×47.5/8sets |
55w |
WORKING PRINCIPLE
TYPICAL INSTALLATION RECOMMEND
PRODUCT APPLICATION
Tap water | Sanitary water disinfection |
Drinking water machine |
FAQ
Q1: What is the maximum pressure of our stainless steel ultraviolet rays?
Our maximum working pressure is 10BAR (10 kg)
Q2:What sockets are there on our UV ballast?
We have British sockets, national standard, European two plugs, European three plugs, American two plugs, American three plugs and Australian three plugs. The voltages are 110V-120V and 220-240V.
Q3:What are the threads of our UV shell?
We usually make BSP threads, and NPT, which is American threads, is commonly used in the United States, so you need to confirm the size of the water inlet and outlet and the type of thread before placing an order.
Q4: What is the commonly used surface treatment of our UV shells?
1. Sandblasting (shot blasting) treatment
2. Polishing treatment
3. Electrolytic polishing
http://www.aguatopone.com/